TYGRIS IS80 BLUE PEELABLE PROTECT 400ML

TYGRIS IS80 BLUE PEELABLE PROTECT 400ML

03-1600004

RRP: £11.31

£4.49 (+ VAT)

Product Options

- +

 

Add to Cart

 

Tygris IS80 is a blue peelable coating, easy to apply and remove quickly to most surfaces, used for sealing out moisture and dust, protecting from corrosion and damage. Also suitable for use on cable joints, switch gear, battery boxes, laboratory and marine fi ttings and for masking glass when painting or spraying surrounding areas.

 

Benefits:

•Easy to apply

•Seals against moisture and corrosion

•Masks glass during acid cleaning

•Suitable for use in spray booths

•For temporary protection (6-8 weeks)

•Coloured deep blue for easy identification

•Oil content prevents adhesion to

 

 

Appearance: Light blue clear flexible coating

Odour: Solvent odour when wet

Contents: Blend of styrene butadiene elastomer in xylene, naphtha, refined mineral oil and isopropanol in dimethyl ether propellant

Storage: Below 50˚C

Flash Point: <0˚C

Temperature range: Avoid direct sunlight as coating will degrade more quickly

Specific Gravity: 0.827

Pack Sizes: 12 x 400ml cans

Directions for Use:

Surface to be coated must be clean and dry.

Shake can well. Spray on light coats from a distance of 25-30cm, allowing to dry for a few moments between coats.

Invert can after use and spray briefly to clear nozzle.

Caution: Not recommended for use on painted surfaces as carrier solvent may activate paint leading to difficulty in removing coating.

 

Close